Hellvape Dead Rabbit 24mm RDA (Squonkable)

• The juice well could be deeper. 5mm is a bit shallow these days.
• Hellvape markets saying the coils don't have to be pre-cut but in reality you just don't have to be as accurate (more of a gripe than a con).

• Great vape over all. Really good flavor and a smooth semi-restricted lung hit
  
• the aesthetics of the Dead Rabbit are good with the resin drip tips and the logo looks cool too
  
• 4 post build deck that simulates a post-less build deck and is actually easier to use that normal post-less decks
  
• clear which post is positive and which is negative
  
• protruding 510 pin, also includes squonking pin with directed juice flow
  
• hatched knurling for airflow adjustments
  
• comes with a pretty cool matching resin 810 drip tip, but does include a Delrin 810 and a 510 adapter
  
• comes in the standard black or stainless steel (plus others) with a choices of green, red or purple resin 810 drip tip
  

The Hellvape Dead Rabbit is a 24mm squonkable RDA. 

It is made from 304 stainless steel with a hatched texture knurling on the top cap which provides a pretty good grip. While some may not like the hatched look, it really plays well with the cool looking dead rabbit logo along with the colored resin 810 drip tip.

The Dead Rabbit RDA is built around a top terminal, four post build deck that simulates a post-less deck. 

The opposing positive and negative posts are different colors, with the positive terminals gold plated and the negative left stainless. This is a good feature that provides clarity for the builder.

With this build deck, it has space for you to cut any excess coil length off from underneath of the post which is easier than post-less as you don't run as much of a risk of ruining a coil due to cutting a lead to short. 

The terminals themselves are quite large, which can handle larger coils and are secured with either flat heads or hex screws.

As with most post-less build decks, you can build a single larger coil instead of dual coils, if desired.

There aren't any clear wicking channels, which means you can just cut them enough to tuck into the well and reach the bottom. 

The juice well isn't very deep, coming in a 5mm, but the side airflow is place fairly high on the barrel so it may be OK to over fill, just don't take the top off with the juice level higher than the well.

The barrel has a slotted top side airflow that is angled downwards. Placing the angle in the airflow slot allows the air to hit the coil at an angle before coming back up the the top cap and it really works out. 

The air is smooth and isn't too airy. It provides more of a restricted lung hit than just blasting vapor.  The airflow, shape of the top and the coil position combine to provide great flavor.

The Dead Rabbit also includes a squonking pin, with a matching allen key, and a specially designed pre-installed PEEK insulator that helps evenly distribute juice. 

Overall, this is a great flavor RDA with some pretty good easy to use build deck, smooth airflow and a enjoyable slightly restricted lung hit.